Cleaning Bathroom Floors

Overview
Bathroom floors are high-traffic, high-moisture areas that require frequent cleaning to maintain hygiene and prevent slip hazards. Proper technique ensures sanitation, removes soap scum and mineral deposits, and reduces the spread of bacteria and odors.

Safety & Preparation

Before starting:

• Wear chemical-resistant gloves, non-slip footwear, and eye protection.
• Post “Caution: Wet Floor” signage at all entrances.
• Remove mats, trash bins, and movable fixtures to clear the area.
• Prepare appropriate cleaning solutions based on surface type (ceramic, vinyl, or stone).

⚠️ Caution: Avoid mixing bleach with acid-based descalers — this produces toxic chlorine gas.

Step-by-Step Cleaning Process

1. Dry Cleaning
   • Sweep or vacuum to remove hair, dust, and debris from corners and edges.
   • Inspect drains and remove any visible obstructions.
2. Chemical Application
   • Apply restroom cleaner or disinfectant evenly over the floor.
   • Allow 3–5 minutes dwell time to break down buildup and kill microorganisms.
   • For scale or heavy soap scum, use a mild acidic cleaner following manufacturer guidelines.
3. Scrubbing
   • Use a deck brush or mop with scrubbing pad to agitate dirt and residue.
   • Focus on grout lines and around toilets, urinals, and sinks.
4. Rinsing & Extraction
   • Rinse thoroughly with clean water using a mop or wet vacuum.
   • Ensure no residue or chemical pooling remains on the surface.
5. Drying
   • Allow the area to air-dry or use fans for faster results.
   • Remove signage only once floors are completely dry.

When It Applies

Perform this cleaning:

• Daily in commercial and high-traffic facilities (offices, schools, gyms).
• After each shift in healthcare or food service environments.
• As needed during emergency spills or maintenance calls.

‍