Hard Hats

Hard hats are protective helmets designed to safeguard workers from head injuries caused by falling objects, electrical hazards, and accidental impacts. They consist of a durable outer shell (typically high-density polyethylene or fiberglass) and an inner suspension system that absorbs shock upon impact. Some models include adjustable ratchets, chin straps, and optional face shields for enhanced protection.

  • Inspect before each use — check for cracks, dents, or discoloration in the shell.
  • Clean with mild soap and warm water; avoid solvents or strong chemicals.
  • Replace immediately if the helmet sustains an impact, even if no visible damage.
  • Replace the suspension system every 12 months, or sooner if stretched or damaged.
  • Full replacement recommended every 5 years from manufacture date (or 3 years in heavy use).
  • Store away from direct sunlight, chemicals, or extreme heat to avoid material degradation.

    • ‍

    Type of PPE

    Head Protection

    When to Use?

    During construction and post-construction cleaning phases. When working beneath overhead fixtures, beams, or ductwork. When using ladders or elevated platforms where items could fall. Whenever there’s a risk of electrical contact or suspended loads nearby. Supervisors must enforce usage during all operations with active construction or mechanical work in progress.

    Hard hats are required in:

    • Post-construction cleaning sites with elevated work or debris overhead.
    • Exterior or industrial cleaning where tools and materials may fall from height.
    • Maintenance and repair areas involving scaffolds, ceiling fixtures, or mechanical systems.
    • Warehouse or equipment rooms where suspended loads are being moved.
    • Any job site where signage specifies “Hard Hat Area.”

    ⚠️ Always ensure the helmet meets CSA Z94.1 or ANSI/ISEA Z89.1 standards for impact and electrical protection.

    ‍

    Situations when is mandatory

    During construction and post-construction cleaning phases. When working beneath overhead fixtures, beams, or ductwork. When using ladders or elevated platforms where items could fall. Whenever there’s a risk of electrical contact or suspended loads nearby. Supervisors must enforce usage during all operations with active construction or mechanical work in progress.

    When to Use?

    During construction and post-construction cleaning phases. When working beneath overhead fixtures, beams, or ductwork. When using ladders or elevated platforms where items could fall. Whenever there’s a risk of electrical contact or suspended loads nearby. Supervisors must enforce usage during all operations with active construction or mechanical work in progress.

    English